Small and thin caps show that the caps are thin and small, and even if the mushrooms are too old to grow, they do not have the special fragrance of mushrooms. The reason for this is that the color conversion is not completed. The flower bag or the white fungus bag is not completed. When the mushroom is produced, the nutrition of the base material is obviously insufficient; the third is the high temperature of growth. Control methods: If there is no bacterial bag that changes color, it is necessary to adjust the conditions to change the color. If the base material is insufficient in nutrients, it can be properly added when the bag is soaked. It can also adopt the method of “fertilizing mushroomâ€, such as spraying edible mushrooms. Three-dimensional nutrition essence can effectively thicken the thickness of the cap; when the temperature is high, effective cooling measures should be taken, such as spraying water to the wall of the mushroom shed.
The cap shape of the cap of the cap-shaped lampshade has a sharp shape of the lampshade, and it is obviously thinned, and the quality of the product is seriously reduced. The main reason is the same as above, and it can be controlled by referring to the above method.
The edge of the striated sclerotium cap is a more regular wavy shape and is also significantly thinner and more brittle. The wavy shape is mainly due to the large temperature difference during the development of the young mushroom, and at the same time, the humidity of the environment changes greatly, especially when the large water is directly sprayed on the cap of the mushroom, which causes the abnormal development of the cap tissue. Prevention methods: After the occurrence of mushroom buds, should maintain a relatively stable temperature and humidity, especially when the back-season cultivation, mushroom shed temperature is often the basic conditions to determine the normal development of fruiting bodies.
The incompatibility of the feces is particularly manifested as caps, narrow or long triangles, etc. The main feature is not roundness. The main reason for this was that the plastic film was not cut in time at the young bud stage. The plastic cap was directly placed on the plastic film and received a certain amount of friction, or mushroom buds occurred more frequently. There was no timely sparse bud treatment until the young bud stage. After the caps differentiate, they are squeezed together. As long as the caps are squeezed when they are young, they will never grow back. Control methods: cut the membrane in time, and perform bud removal treatment. Generally, only 1 or 2 young buds should be selected. Do not use too much.
The stipe hollow stem is slender and hollow, resulting in a very small cap, which is mainly caused by the low moisture content of the base material and the low space humidity. Control methods: After each tide is harvested, bubble bags should be treated. Normally, soaking for 24 hours can restore the original weight; keeping mushroom shed air humidity above 85%.
When the stipe grows out of the crack and the moisture content of the bacteria bag is too low, the base material cracks, and after a narrow slit is formed, the fruiting body can grow out of the crack, and some even do not completely drill out, and the cap is inside the gap. If you grow up, you will not be able to realize the value of your products. Control methods: insist on bag treatment, do not make it crack.
Stem twisted mushroom sheds are prone to this phenomenon when the air humidity is low, light is strong, or the light angle changes too frequently. Control methods: Maintain a relatively stable air humidity, and maintain a relatively stable light, generally requires a scattering of 1000 lux to meet.
Candle mushroom candle mushroom is characterized by bare stipe, there is no normal cap structure, like a candle. Causes: First, the bud structure of the mushroom bud is damaged; second, the carbon dioxide concentration in the shed is too high. Control methods: cut membranes in time; be careful not to hurt and want to stay buds when budding; adhere to better ventilation, keep the shed fresh air conditions.
Specifications:
Display size: 7 inch TFT
Scanning manner: Electronic convex array, electronic linear array
Working frequency: 2.0MHz~10MHz
Display mode: B, B+B, B+M, M, 4B
Scanning range: Convex array 60°~150°
Amplification factor:1.0, 1.2, 1.5,2.0
Gain control: 8 segments TGC and overall gain can be adjusted respectively
Image processing: 8 γ corrections, frame correlation, point correlation, line correlation, digital filtering, digital edge enhancement and pseudo color processing, etc
Image gray-scale: 256 levels
Scanning line number: 512 lines/frame
Frame rate: 30 frames/second
Digital scanning conversion: 512×512×8 bits
Memory capacity: ≥2GB
Conventional measurements: distance, perimeter, area, volume
Obstetric measurement: horses, cattle, sheep, dogs, cats obstetric measurement
Report function: auto make report
Battery capacity: 3000mAH/7.4V,can work more than 2 hours
Display screen: 7" TFT
Output interface: USB port, video.
Overall size: 216mm×147mm×27mm
Total weight: 950g(with battery)
Waterproof: IP65(optional)
Standard Configuration:
Host, convex probe, built-in battery, power adapter, bag.
Optional:
Linear probe, Micro-convex probe, Rectal probe, Backfat probe.
Palm Ultrasound Series,Palm Ultrasound Scanner For Vet,Healthcare Handheld Ultrasound System,Handheld Ultrasound Iphone
Guangzhou Sonostar Technologies Co., Limited , https://www.sonoeye.com