What is the leak after the installation of the laboratory ultrapure water machine?

Laboratory ultra-pure water machine is an important equipment for experimental research. Xiaobian recently saw many people have such doubts on the Q&A platform. Some customers went back to the installation and found that the water leakage was very serious. According to Xiaobian, there are many reasons why the laboratory ultra-pure water machine leaks. The novice can look at three points:

1. The laboratory ultra-pure water machine parts are installed incorrectly.

The laboratory ultra-pure water machine is made up of many kinds of accessories. If water leakage occurs, it is very likely that there is a problem in the assembly of the accessories. In this case, it is best to refer to the manual, from the new laboratory ultra-pure water machine. The accessories are sorted and assembled. The normal installation process is not leaking!

2, the filter ring is not installed on the rubber ring

The filter housing is made of plastic material. If it is directly connected, water leakage will occur. Generally, a soft rubber ring will be installed inside the filter housing to help fix it. The leakage of the ultra-pure water machine in the laboratory may be caused by the position of the apron on the filter casing not being installed, and the connection of the filter casing is not tight enough to cause water leakage.

Solution: Find the rubber ring and fix it to the filter housing interface, then install the filter housing!

3, the water pipe is not inserted or leaking

The function of the water pipe in the laboratory ultra-pure water machine is to help transport the water source. When connecting the internal filter element of the laboratory ultra-pure water machine, the quick connector is used to help the connection. If the water inside the laboratory ultra-pure water machine leaks, check the water pipe and the joint. Is the connection not tight enough? If there is a problem here, it is best to cut the water pipe head horizontally with a pipe cutter, and then connect it to the joint and pull it a few times to avoid water leakage!

The laboratory ultra-pure water machine [] does not worry about water leakage, open the laboratory ultra-pure water machine casing, check that there is water leakage in that part, if it is the above three cases, solve the above solution. If you can't solve the best direct Aike after-sales processing.

Water Dental Flosser

Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.meizons.com

Posted on