The eight points that need to be noticed when using the gear reducer equipment and equipment, Hubei Kaihang intelligent equipment only to do professional quality, and strive to keep improving and speak with quality.
The reducer is a common power transmission mechanism and is used in various mechanical transmission systems. The equipment and operation of the reducer are directly related to the working function of the reducer, and should conform to the technical specifications and specifications. The reasonable equipment and application of the reducer should pay attention to the following points.
1. When the reducer is in the equipment, pay special attention to the alignment of the axis of the transmission base. The alignment error should not exceed the compensation of the coupling used by the reducer. After the gearbox is aligned according to the request, it can obtain more aspirational transmission and a longer service life.
2. When the output shaft of the reducer is on the transmission part of the equipment, it is necessary to pay attention to the softness of the operation. It is forbidden to use the hammer and other things to rough the equipment. The most is to use the internal thread of the assembly fixture and the end shaft to carry out the equipment. Press the drive into the reducer so that the internal parts of the reducer can be maintained without damage.
3. There are many types of couplings selected for the reducer, but do not use steel fixed couplings. The equipment of these types of couplings is difficult to match. If the equipment is not suitable, the load will be increased. Damage to the bearings is formed and even cracks in the output shaft are formed.
4. The fixing of the reducer is very important. To ensure the smoothness and firmness, we should generally put the reducer on a horizontal base or base, and the oil in the drain should be removed and the cooling air circulating. If the fixing of the reducer is not good enough and the base is not secure, it will appear to form, oscillate, etc., and the bearings and gears will be unnecessarily damaged.
5. The transmission coupling of the reducer should be equipped with protective equipment when necessary. For example, there are excellent objects on the coupling or gears, sprocket transmission, etc. If the radial load received by the output shaft is large, the reinforcement type should also be used.
6. The gear unit's equipment orientation must ensure the operation of the staff, including convenient access to the cursor, vent plug and drain plug. After the equipment of the reducer is completed, the inspection personnel should check the accuracy of the orientation of the equipment in order, and determine the reliability of each fastener.
7. Before the working of the reducer, it is necessary to prepare the work. Replace the vent hole plug of the oil pool and replace it with a vent plug. Turn over the oil level plug screw to check the height of the oil line and increase the oil to the oil level. After the hole overflows, and then screw the oil level plug and make sure it is correct, you can start the test work.
8. The test operation time of the reducer should not be less than two hours. The normal working norm is stable work, no oscillation, no noise, no leakage, no impact. If abnormal conditions are present, it should be cleaned up in time.
4 Wire Intercom Video Doorbell,4 Wire Intercom Video Doorbell Villa,4 Wire Connection 4 Wire Intercom System
Zhuhai Mingke Electronics Technology Co., Ltd , https://www.zhmkdz-electronics.com