Agaricus bisporus, Coprinus comatus, Agaricus Blazei Buds Management

First, the conditions of mushroom bud formation temperature is 15 °C ~ 22 °C, diurnal temperature difference is 8 °C ~ 10 °C, relative humidity of air is 80% ~ 90%, and to maintain a certain degree of scattered light and good ventilation. After the mycelium is full of material, it needs to be covered with soil to produce mushrooms. Therefore, the adjustment of water after the soil covering and soil covering is more important for accelerating the bud.
Second, the mattress cultivation and budding method When the mycelium full of material layer or long to mid-layer 2/3, cover 3 to 5 cm thick on the bed topsoil, cover soil before use to disinfect. After covering the earth for 1 day, then spray water. Spraying water should take a small number of times, that is, spray water 7 to 8 times a day. In 3 to 4 angels, the water content is kept at 18% to 20%. Water diversion can use 1% of clarified lime water or tap water. In the transfer of water, it is necessary to increase the amount of ventilation, and after the water transfer, the amount of ventilation should be appropriately reduced. Covering soil and diverting water can not only provide the temperature and humidity needed for the formation of mushroom buds, but also stimulate the kinks of the mycelium to form mushroom buds.
Third, the bags of soil covered with soil budding method When the mycelium covered the bag, remove the bag membrane, the fungus will be discharged on the bed of the mushrooming yard, bacteria from the 2 to 3 cm, the middle filled with fertilizer, when the bed After the raft is full, cover 3 to 5 cm thick loam. Cover the soil with water spray and humidity control, so that the soil moisture content is maintained at 18% to 20% covered with film insulation moisturizing, after every day to remove membrane ventilation, spray water to maintain air humidity, 10 to 20 days mushroom buds can be formed.
Fourth, after the formation of the buds, the growth of the buds should be given suitable conditions so that the buds can grow robustly. The temperature is maintained at 10 °C ~ 16 °C, the humidity is maintained at 85% ~ 90%, there is good scattering of light, there is fresh air, daily water spray moisturizing and ventilation. Before the buds differentiate, do not spray water directly on the buds. (Professor of Henan Agricultural University)

Medical Disposables

We will provide many kinds of medical disposables, for example:

Transfusion Disposable Products

Cardiology Disposable Products

Infusion Disposable Products

Surgical Medical Gloves

Plastic Scissors

Plastic Mouth Piece for Endoscopes

Urology Disposables Products

Anaesthesia Disposable Products

General Surgery

Gynaecology and Paediatric Disposable Products

Non Woven Disposable Products

Surgical Blades & Scalpels

Blood Collection Tubes

Plastic Vaginal Speculum

Waste Management

Plastic Sponge Holder

Plastic Tweezers

Gastro Entrology Disposable Products

Surgical Dressings

Laryngeal Mask

Tube with Swab

ECG Electrodes

Maternity Pads

Blood Bag Systems

General Disposables

-

General Medical Disposables,Medical Mask,Medical Gauze,Medical Syringe

NOUVASANT GROUP LTD. , https://www.nouvasant.com

Posted on