Introduction to the working principle of ice making mechanism ice

Summer is coming, the ice machine is gradually increasing, so how does the ice machine make ice? The following is a detailed analysis of how the ice machine can make ice for you. Ice machine is widely used in restaurants, hotels, nightclubs, hospitals, schools, laboratories, scientific research institutes and other places as well as supermarket food preservation, fishery fishing refrigeration, medical applications, chemical, food processing and other industries.
Ice machine working principle:
1. The chilled water of the water storage tank is continuously circulated through the plate or the divided evaporator by the water pump;
2. After the compressor is operated, it is subjected to suction-compression-exhaust-condensation (liquefaction)-throttle--in the evaporator, vaporization at a low temperature of -10 to -18 degrees. The chilled water continuously condenses into an ice layer on the surface of the lower temperature evaporator at a water temperature of 0 degrees. When the ice layer condenses to a certain thickness, after the evaporation temperature of the refrigerant reaches the temperature control set temperature, the defrosting solenoid valve is often turned on and the heat pump is used to de-ice, and the next cycle is realized.
Ice making process of ice machine:
Through the inlet valve, the water automatically enters a water storage tank, and then pumps water to the diverter tube. The diverter tube uniformly flows the water to the evaporator cooled by the low-temperature liquid refrigerant, and the water is cooled to the freezing point, which is cooled to the freezing point. The water will solidify into ice, and the water that has not been frozen by the evaporator flows into the water reservoir again, and the circulation is resumed by the water pump.
When the ice cube reaches the required thickness, it enters the deicing state, and the high pressure hot gas discharged from the compressor is led to the evaporator through the reversing valve to replace the low temperature liquid refrigerant. Thus, a water film is formed between the ice cube and the evaporator, and the water film separates the ice cubes from the evaporator, and the ice cubes fall freely into the ice storage tank by gravity.

Patch For Diarrhea

Medical Cold Patch
Patch for diarrhea
[Name] Medical Cold Patch
[Package Dimension] 5cm 4pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give a fast relief for diarrhea.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.







Patch For Diarrhea,Medicated Patches For Arthiritis,Plaster For Diarrhea,Pad For Diarrhea

Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xijieyitongpatches.com

Posted on