At present, most corn fields are from the big bell mouth stage to the tasseling and silking stage. Strengthening the field management in the middle and late stages is of great significance for ensuring the full grain weight and achieving high yields. In this issue, the farmer has compiled the following corn field management measures for farmers' reference:
Pay close attention to scientific top dressing, strengthen the plant and delay the decline
At present, summer maize is commonly planted with fertilizer, and there is more precipitation in the early stage, and the plant grows rapidly. The soil nutrients, especially nitrogen, are leached seriously, which is easy to cause defertilization in the later stage. The big bell-mouth period is the key period for corn to require fertilizer. For normal plots, 12-15 kilograms of urea and 10-15 kilograms of potassium sulfate are applied per acre. The high-yield plots should be appropriately increased. If conditions permit, drones can be used to spray a mixture of potassium dihydrogen phosphate, urea, etc. on the leaf surface during the filling period to delay leaf senescence, promote photosynthetic product accumulation, and increase grain weight.
"One prevention and double reduction" to prevent pests
Since corn was planted, there has been more precipitation, high humidity and high temperature in the field, and the probability of pests and diseases in the later period increases. At present, it is the critical period for "one prevention and double reduction", mixing sterilization and insecticides, and using large-scale pesticide application equipment or flying control for large-scale prevention and control, one-time pesticide application and treatment of multiple diseases and insect pests, and reduce ear insects in the middle and late stages of corn Occurrence base, reduce disease prevalence, and reduce yield loss caused by disease and insect pests.
Do a good job after the rain to reduce losses due to disasters
Pay close attention to changes in the weather, clear the ditches in time, and drain the field water as soon as possible when waterlogging occurs. If the plant falls and can stand up again due to strong wind, bamboo poles can be used to knock off the accumulated water of the plant to promote the restoration of growth; if the yield is seriously affected, it should be removed or silaged in time.
Improve pollination quality to ensure large ears and more grains
High temperature and dryness and rainy weather will affect the normal pollination of corn. The high-yield plots have large populations and high overlap of leaves. Artificial emasculation and low-altitude drone flight assisted pollination can be carried out to promote uniform pollen dispersion to increase the seed setting rate and ensure that the ears are large and more grains.
Mechanical harvesting at the right time to maximize production potential
At present, most varieties have a long growth period and cannot mature normally at harvest. Harvesting at the right time can ensure the filling time, guarantee the accumulation of dry matter, and give full play to the high yield potential of the variety. It is recommended that general plots be harvested at the end of September and early October, and high-yield plots should be harvested around October 10. At the same time, when the water content of corn kernels drops to 26%, the corn grains can be harvested directly.
Learn to guide, improve the quality of straw utilization
For plots where straw is returned to the field, it is necessary to strengthen the training of the operators to ensure that the corn stalks are chopped and thrown evenly. When deep turning, urea and composting agents should be added to speed up the decomposition of the straw; areas with conditions can carry out corn yellow storage and biomass Can be used comprehensively.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone
Integrated Roughness Profilometer
Roughness Profilometer, also known as surface roughness meter, surface smoothness meter, surface roughness tester, roughness measurement meter, roughness tester, and other names. It has the characteristics of high measurement accuracy, wide measurement range, easy operation, portability, and stable operation. It can be widely used for the detection of various metal and non-metal processing surfaces. This instrument is a pocket instrument that integrates sensors and hosts, with handheld characteristics, making it more suitable for use in production sites. The exterior design is sturdy and durable, with significant resistance to electromagnetic interference, in line with current design trends.
The application fields of roughness meters include:
1. Mechanical processing and manufacturing industry, mainly metal processing and manufacturing. Roughness meters were originally developed to detect the surface roughness of machined parts. Especially, stylus type roughness measuring instruments are more suitable for detecting hard metal surfaces. For example, the automotive parts processing and manufacturing industry, the mechanical parts processing and manufacturing industry, and so on. As long as these processing and manufacturing industries involve the surface quality of workpieces, the detection application of roughness meters is essential.
2. In the non-metallic processing and manufacturing industry, with the progress and development of technology, more and more new materials are applied to processing processes, such as ceramics, plastics, polyethylene, etc. Some bearings are now made of special ceramic materials, and pump valves are made of polyethylene materials. These materials have a hard texture, and some applications can replace metal materials to make workpieces. During production and processing, their surface roughness also needs to be tested.
3. With the continuous strengthening and improvement of the technology and functions of roughness meters, as well as their in-depth promotion and application, more and more industries have been found to require roughness detection. In addition to mechanical processing and manufacturing, roughness evaluation is also required in the production and processing of power, communication, electronics, such as couplings on switches, integrated circuit semiconductors, and even stationery, tableware, and other products used in people's daily lives The surface roughness of human teeth needs to be tested.
Integrated Roughness Profilometer,Integrated Roughness Profiler, Measuring Instrument,High Speed Profilometer
Zhejiang dexun instrument technology co., ltd , https://www.dexunmeasuring.com