Do not start the slamming clutch. Slowly release the clutch pedal and increase the throttle. Otherwise it will cause the impact of the clutch assembly and transmission parts, and even damage.
The secondary clutch cannot be pulled up (detached) for a long time. The secondary clutch cannot be pulled up (separated) for a long period of time. Otherwise, it may cause early clutch damage and should be noticed. The tractor must not hang neutral or step down the clutch pedal to go downhill.
When the steering tractor of the tractor should reduce the throttle or shift to the low gear while turning, it must not use the sharp turning of the unilateral brake.
When the tractor differential lock is used by the tractor, the differential lock is generally kept in a disengaged state. When the unilateral slip of the rear wheel of the tractor is serious (or when it is in a pit), the differential lock control pedal should be stepped on and kept in this position to combine the differential lock and drive the tractor out of the slippery area. When the differential lock is engaged, the tractor cannot turn and it will cause abnormal wear of the tire, damage to the central drive, and even rollover.
Under normal circumstances, the tractor should reduce the engine throttle, then step on the main clutch pedal, and then gradually depress the running brake control pedal, so that the tractor stopped. In case of emergency braking, the main clutch pedal and the service brake operating pedal should be depressed at the same time. During driving, the driver is not allowed to place his or her foot on the brake or clutch pedal.
Front-wheel drive maneuvering When the tractor is working in a field with heavy loads or working on moist, loose soil, it is usually attached to the front drive axle. When the tractor is on a hard road for general transport operations, it is not allowed to engage the front drive axle. Can cause early wear in the front wheels.
Hydraulic output valve and its operation The tractor is equipped with a single-acting or double-acting hydraulic output valve. The hydraulic output valve control handle is used to control the single-acting or double-acting cylinder on the implement. The hydraulic output valve of the pulling machine is adjusted to have a double action before leaving the factory. If a single-acting agricultural implement is required, the user can adjust it to a single-acting hydraulic output.
Tractor oil requirements 1, according to different environments, seasons choose different grades of diesel. It is forbidden to mix different grades of diesel fuel. 2. The fuel oil and transmission hydraulic oil added to the fuel tank must be filtered and deposited before they can be used. 3, the engine is running, must not fuel the fuel tank. If the tractor is working in hot or sunshine, the tank cannot be filled with oil. Otherwise, the fuel will overflow due to swelling, and if it spills, wipe it dry immediately.
Organic Cotton Yarn,Organic Hemp Yarn,Pure Cotton Yarn,Cotton Modal Yarn
Henan Xianghe Medical Materials Co., Ltd. , https://www.xiangheweicai.com